Trimble
PDF Export RSS - Latest News


Archive

The archive contains known issues that are solved for more than one year ago.

KNOWN ISSUES IN NOVAPOINT 21
Date
YYYY/MM/DD
From
version
Description Fixed in
version
2018/05/09 21 Draw roadmodel missing possiblity to draw 3D-surfaces.
Temporary solution: Draw through planpresentation in Base to CAD.
2019-02-04: Will not be re-implemented to Draw Road Model.
2019-04-02
2018/05/09 21 Draw roadmodel missing possiblity to draw 3D-solids.
Temporary solution: Draw through planpresentation in Base to CAD.
2019-02-04: Will not be re-implemented to Draw Road Model.
2019-04-02
2018/06/20 21 Quantity report to TILOS not working. 21.FP3
2018/11/21 21 Some cases of crash related to profiles with boundary to centerline on both left- and righthand side. Does not happen always.
Temporary solution: Do not include these chainages if it is in start and end of the model, or have a continuous surface still created if it is in the middle of the model (Distance = 0.05)
NP21.FP3
2018/11/01 21 Quantity report hanging and not producing the report.
Temporary solution: Use 'View in Table' available through right-click menu on the task.
NP21.FP2a: Made improvements, but one known issue remains.
2018/10/27 21 Road task templates does not work properly. NP21.FP3
2018/08/14 21 'Insert Proposal' for Advanced Ditch is temporarily removed. NP21.FP3
2018/07/06 21 Rehabilitation function not always triggering and is slow. NP21.FP3
2018/05/09 21 Not all solids are created as they should. Quantity calculations will then be wrong.
NP21.FP2: Improvements have been done, but still some objects are missing.
NP21.FP3
2018/05/09 21 Setting Out Data dialog is removed and but we do not have a replacement function for this today.
Temporary solution: Use normal export of surfaces and lines from Novapoint Base > Output > Export.
NP21.FP2
2018/09/27 21 Building road task fails in some cases with crash or hanging behaviour.
Temporary solution: Try to export PARAM- or MODEL-files and create a new road task.
NP21.FP2
2018/09/19 21 Draw Road model to CAD crashes in some cases when slope symbols are activated. NP21.FP2
2018/07/03 21 Traditional quantity reports from the road task gets bigger volumes where the road goes in an S-curve. Cutting of the solids sees the road model in multiple places.
Temporary solution:
1) Build the road model in parts so that the cross-sections do not overlapp and extract multiple reports.
2) Use the new Table-function (right-click on road task > View in Table, or View > Presentation > Table). Get a excelreport from this task.
NP21.FP2
2018/06/14 21 Alignment Design makes an error when the function Get fixed points from result is used.
Temporary solution: Use rather 1) Calculate Angular Points and then 2) Split Angular Points.
NP21.FP2
2018/05/09 21 Upgrading road task can fail in some cases.
Temporary solution: Cancel the task or the whole quadrimodel. Revert the dataset if needed and try again.
NP21.FP2
2018/05/09 21 Linetasks as illustration objects does not always show. Results in Rehabilitation not working correctly. NP21.FP2
2018/05/09 21 Draw Longitudinal Profile missing diagram-bars for quantities. NP21.FP2
2018/05/09 21 Draw Cross-sections missing mass hatches.
Temporary solution: Draw out through Cross-section presentation in Base to CAD. Surfaces are then only drawn in the same color without legend.
NP21.FP2
2018/05/09 21 Sightlines from the road model are shown as black lines in the Default Drawingrule because of some missing attributes.
Temporary solution: Use the Basic3D drawingrule to view the data correctly.
NP21.FP1
2016/12/01 ALL Error when drawing cross-sections with mass hatches when advanced softsoil removal is used AND and the cut surface from the bottom of the softsoil removal hits a sub-surface layer.

NOTE: Quantity calculations will still be OK, but it is adviced to do a quality check to be absolutely sure.
Temporary solution: Apply a steeper cut slope in the Softsoil Removal dialog.
21
2016/07/14 20 Copy, edit and delete vehicle in Vehicle Track Analysis is not available. 21
KNOWN ISSUES IN NOVAPOINT 20
Date
YYYY/MM/DD
From
version
Description Fixed in
version
2018/06/22 20.FP6d Error in cross section calculation for both road and rail, when using alignments as surface edge. 20.FP6e
2016/12/22 20 Roadmodels don't build when the startpoint of the roadmodel is set before chainage -999.999. 20.FP2b
2016/12/02 20.FP1 Drawing out Longitudinal Profile gave a blue terrain line with “unknown material” layername. The line was not affected when using the Split Longitudinal Profile either. 20.FP2
2016/10/20 20.FP1 Quantity calculations was not done for all roadmodels when they were build from the “old” roadmodelling tool.
Temporary solution: Build the model from the Road Ribbon with Preview or OK.
Background: Missing conversion rules in the roadmodel as some rulesets were not converted when going to NP20 (as designed). See Errormessage 108 for more information.
20.FP2
2016/10/21 20 Sight Distance Analysis is shown as red lines and NOT OK. There is an error in the conversion rule doing this and it affects all roadmodels. NOTE: The Sight Distance Analysis is correct.
Temporary solution:
Change the 'Rules for results' for the sightanalysis. Look here for help.
20.FP2
2016/10/14 20 Draw Cross-sections crash when using External models in the roadmodel and when these are trimmed by the “invisible green frames” shown in the Draw Cross-section dialog.
Temporary solution: Remove the External models and use them as Illustration Objects instead, or change the scale to fit the roadmodel and external model within the frames.
20.FP2
2016/09/30 20 Crash when exporting Setting Out Data from roadmodel.
NOTE: Applies to Microsoft Windows 10 users.
20.FP2
2016/09/15 20 Reserving a Line-task can give Read-Only rights to the files. The changes is not stored to the Quadri results, but is still available in the project when reopening the changed alignment from the Quadrimodel.
Temporary solution: Release and Reserve the task one more time.
20.FP2
2016/10/19 20.FP1 After implementing stricter rules in the roadmodel the quantity report or roadmodel results is not stored when calculating with error message Error or Serious error. The solution is in line with what we want, but we introduced it a bit to early resulting in a few support cases and will remove it again and reimplement it with a bypass-option for the user.
Temporary solution: Remove the errors.
20.FP1a
2016/10/01 20.FP1 Error with crossfall calculation on all Norwegian road standards. Affects many, but not all reference alignment combinations. 20.FP1a
2016/09/13 20 Roadmodels with period (.) in the modelfilename gives errors when trying to store Alignment from Surface Edge in the Cross-section Viewer. 20.FP1
2016/07/xx 20 Does not support period (.) in the filename. When converting from NP19 to NP20 the roadmodels with period will feil when calculating. The solution is to create a new roadmodel without the period (.) in the filenames through using the .IND-format to transfer data. 20.FP1
KNOWN ISSUES IN NOVAPOINT 19
Date
YYYY/MM/DD
From
version
Description Fixed in
version
2016/09/15 19.3x.FP3 Reserving a Line-task can give Read-Only rights to the files. The changes is not stored to the Quadri results, but is still available in the project when reopening the changed alignment from the Quadrimodel.
Temporary solution: Release and Reserve the task one more time.
20.FP2
2016/09/13 ALL Roadmodels with period (.) in the modelfilename gives errors when trying to store Alignment from Surface Edge in the Cross-section Viewer. 20.FP1
2016/04/21 19.3x.FP3 Quantity calculation gives wrong results for the filter course area and pavement volumes. 19.3x.FP3a
19.3x.FP3 In some cases when the reference alignment is rounded the wrong way in the start and end chainage the features that appear in these chainages is not created.
Temporary solution: Turn off “Full length” and set the start and end chainage manually.
20
19.3x.FP3 When using Insert Edge the inner fill slope shoots across the cross-section in the Cross-section Viewer. The error is just visually in the Cross-section Viewer and does not affect quantities or result features from the roadmodel. 19.3x.FP3b
19.3x.FP3 The terrain surface is in some cases drawn multiple times and goes back and forth in the Longitudinal Profile. 19.3x.FP3b
2016/02/21 19.3x.FP2a Updating the Longitudinal Profile does not remove the old drawing. 19.3x.FP3
19.3x When we removed access to the “old” roadtool from the AutoCAD Toolbar the functions was not reset properly.
Temporary solution: Run Reset User Settings or reinstall and it will fix itself.
20
en/np/road/release_notes/known_issues/archive/start.txt · Last modified: 2020/02/25 08:12 by vn_no_dso