PDF Export RSS - Latest News

Drawing Longitudinal Profile

If you have trouble drawing out the longitudinal profile please try these helpful tips.

Drawing Style is missing key elements

Answer: Try using a different drawing style or drawing from a different road model. Is it still the same problem?

Check if any of the layers in the drawing is turned off or frozen?

Try running Reset User Settings.

Cannot draw the whole road model

Answer: Is the road model build for the whole stretch you want to draw?

Missing terrain when drawing out the longitudinal profile

“The terrain line is missing but I still have values for terrain elevation in the bottom half of the frame.”

Answer: Try turning on Simplify terrain cross-sections in the roadmodel settings. Then rebuild the model.

To access this:

  1. Roadmodel settings from Design ribbon or Model > Settings in Classic roadmodeling tool
  2. Go to Terrain Boundaries
  3. Go to Advanced
  4. Turn on Simplify terrain cross-sections

You could also try to vary the horizontal and vertical tolerance.

en/np/road/faq/draw_longitudinal_profile/start.txt · Last modified: 2016/03/02 06:21 by vn_no_dso